Hardware & Webbing

Cargo Securement General Hardware and Webbing

43044-10 Snap Hooks of assorted sizes Wire Hooks of assorted types and sizes Grab Hooks of assorted types and sizes

Chain Attachments - RTJ Cluster Hooks - Ratchets - Snap Hooks, Grab Hooks,

Chain Hooks - E track Clips - Clevis Hooks - Door Pull Staps

View as Grid List

Sort by

Display per page

1" Wire 'S' Hook for Tarp Ties - 100 Per Bag

KN-2200-SH

From $24.31

Spare bag of S-Hooks for tarp ties.

Quanity: 100 per box

Weight: 4.0 lbs., 1.8 kgs. per 100 pack

3/8" Redi-Cut Rubber Rope

KN-10037

From $59.41

Diameter: 3/8", Length: 150' roll

Solid Core Rubber Rope. Versatile Redi-Cut Rubber Rope provides for fast, secure tie-down of tarps. Redi-Cut Rubber Rope is made from EDPM Synthetic Rubber.

Rope can be used with S-J Hooks (10120) to make custom length tarp ties.

Weight: 8.1 lbs., 3.7 kgs.

7/16" Redi-Cut Rubber Rope

KN-10109

From $64.59

Diameter: 7/16", Length: 150' roll

Solid Core Rubber Rope. Versatile Redi-Cut Rubber Rope provides for fast, secure tie-down of tarps. Redi-Cut Rubber Rope is made from EDPM Synthetic Rubber.

Rope should be used with S-J Hooks (10120) to make custom length tarp ties.

Weight: 11.3 lbs., 5.1 kgs.

Rubber Rope - 3/8" Solid Core - 150ft Roll

49454-11

From $56.17

3/8 Inch Solid Core - 150 feet Roll Rubber Rope

S-J Hook - 100 Per Bag

KN-10120

From $35.39

S-J Hooks for use with Rubber Rope

Quanity: 100 Per Bag, 1 unit equals bag of 100 hooks.

Weight: 4.8 lbs., 2.2 kgs.

Special J Hook

KN-10004

From $8.16

All C and J hooks are flame cut from 5/8" steel. They are designed to fit flat on truck trailer side frames for easy welding and will accept D-rings, web loops, cable or rope.

Working Load Limit: 6,670 lbs./3032 kgs.

Note: Strength is dependent upon the quality and integrity of the weld. Minimum welding requirements are 1/4" fillet weld around entire contact surface, and 1/8" penetration.

Weight: 0.7 lbs., 0.3 kgs.

Standard C Hook

KN-10002

From $6.63

All C and J hooks are flame cut from 5/8" steel. They are designed to fit flat on truck trailer side frames for easy welding and will accept D-rings, web loops, cable or rope.

Working Load Limit: 6,670 lbs./3032 kgs.

Note: Strength is dependent upon the and integrity of the weld. Minimum welding requirements are 1/4" fillet weld around entire contact surface, and 1/8" penetration.

Weight: 0.5 lbs., 0.2 kgs

Standard J Hook

KN-10003

From $5.63

All C and J hooks are flame cut from 5/8" steel. They are designed to fit flat on truck trailer side frames for easy welding and will accept D-rings, web loops, cable or rope.

Working Load Limit: 6,670 lbs./3032 kgs.

Note: Strength is dependent upon the quality and integrity of the weld. Minimum welding requirements are 1/4" fillet weld around entire contact surface, and 1/8" penetration.

Weight: 0.5 lbs., 0.2 kgs