Working Load Limit of 1,333 lbs
Steel fitting with electro-coated black finish to resist rusting br>
Bolt or screw to sidewalls, floors, ceilings, or wood studs br>
Kinedyne's floor chain tie-down is for use on steel frame flatbed trailers with standard hardwood decks. It is a self-storing, convenient anchor point for securing loads. Welds to trailer cross member. It mounts flush with the standard hard wood trailer deck to prevent interference during loading or unloading.
Working Load Limit: 5,000 lbs./2270 kgs.
Minimum weld requirements are 1/4" filet weld around entire contact surface and 1/8" penetration.
The Aftermarket version offers the ability to convert any standard ratchet strap.
The StrapPak® by Kinedyne offers a quick and inexpensive way to secure the loose end of your straps.Attach to any standard 2” ratchet strap
Safely secure excess web on ratchet straps up to 30 feet in length
Can be used on any open-air or enclosed trailer or utility truck
You will never again have to use duct tape or cable ties to secure the loose end of your straps. The StrapPak also serves as a convenient storage solution for your strap when it is not in use