3 3/4" High rails, with 1 1/2" curb height, make ramps safer and stronger, especially for longer length ramps.
Tapered bottom at the lower end of ramp makes loading of heavy goods easier. No bump which is objectionable to many customers.
Serrated flooring gives good traction.
Comes in 28" and 38" widths.
Custom Sizes available upon request.
AWR with Grip Strut Model is used for snow belt region's or where extra traction is needed.
Load and unload trucks when docks are unavailable. The open deck design allows snow, ice and water to fall through ramp providing a positive grip for delivery men, shippers and receivers. 100% welded aluminum construction is light-weight and will not rust. Ramps feature a 2" high safety curb on each side.
TM Model is for Mounting Under the Truck for a more permanant solution.
Ramp includes steel pocket frame for under-truck mounting. Frame includes linkage to prevent ramp from falling out. Manual spring-loaded lock secures ramp into frame. Handle loops are included to help with deploying the ramp. Overlap style end lip rests on trailer bed and provides smooth transition. Each unit includes two safety chains to connect ramp to trailer for safety. Curb height is 2". Solid treadplate deck type features non-slip serrations for extra grip. 100% welded aluminum construction is light-weight and will not rust.
FWR Model is Fiberglass Walk Ramps.
Load and unload equipment from trucks using these Heavy Duty Fiberglass Walk Ramps. Reinforced fiberglass construction provides up to 5,000 pounds capacity. Abrasive surface provides good traction either wet or dry. 1" high curb on each side of ramp. Not for use with fork trucks or pallet trucks.
FAL Model is Fiberglass Auto Loaders for loading vehicles.
The Autoloader Ramp has all the great features of the Heavy duty fiberglass walkramps may be separated in half to provide two ramps which may be used to load automobiles and other vehicles. Autoloader ramps have 5,000 pounds capacity.
VTR Model is Aluminum Vehicle Twin Ramps
Provide a safe means for driving vans, pick-up trucks and some passenger vehicles from ground level into and out of high building entrances. Ramps can be securely fastened to dock with w/ chains (34") attached to ramps with hook on the end. To avoid hang-ups measure under clearance and wheelbase of vehicle. The usable width is 14". Side curbs are 1-1⁄4" high. Welded aluminum construction. Sold in pairs.
Overlap style Aluminum Van Loading Ramps - 28 Inches Wide. Premium commercial grade Aluminum van walk ramp and moving ramps are used to load people and two or four wheeled dollies into trailers or truck.
Walk Ramps With Snow/Ice Grip - 28" Wide Overlap Style
Load and unload trucks when docks are unavailable. The open deck design allows snow, ice, and water to fall through ramp providing a positive grip for delivery personnel, shippers, and receivers. One hundred percent welded aluminum construction is lightweight and will not rust. Ramps feature a 2" high safety curb on each side. Overlap style end lip rests on the trailer bed to provide a smooth transition. Each unit includes two (2) safety chains to connect the ramp to the trailer for safety. Not for pallet trucks or three-wheeled carts. br>
The Fiberglass Vehicle Split Ramp may be separated in half to provide two ramps which may be used to load automobiles and other vehicles.
Due to fluctuating prices because of the idiots occupying the Whitehouse, the split ramp autoloaders are quoted at the time of purchase. You may use the "CONTACT US" form on this page to get a quote. Be sure to enter the model number that you want quoted.
Walk Ramps With Snow/Ice Grip & Wheels - Choose from 28" or 38" Wide.
Aluminum Walk Ramps with Adjustable Height Wheel, is ideal for use with aluminum ramps 10 feet or longer. Height is adjusted with a manual hand crank mechanism. Wheels are 10" x 3-1/2" pneumatic and are located at balance points on the ramp. Simple bolt-on installation. br>