Sliding winches will move easily in both directions to position on the track and then lock into place when tension is applied to the webbing. Sliding winches must be used with Kinedyne winch track (Part Numbers 3606 and 3607). All sliding winches can also be welded in place for fixed application.
Sliding winches will move easily in both directions to position on the track and then lock into place when tension is applied to the webbing. Sliding winches must be used with Kinedyne winch track (Part Numbers 3606 and 3607). All sliding winches can also be welded in place for fixed application.
Sliding winches will move easily in both directions to position on the track and then lock into place when tension is applied to the webbing. Sliding winches must be used with Kinedyne winch track (Part Numbers 3606 and 3607). All sliding winches can also be welded in place for fixed application.
Sliding winches will move easily in both directions to position on the track and then lock into place when tension is applied to the webbing. Sliding winches must be used with Kinedyne winch track (Part Numbers 3606 and 3607). All sliding winches can also be welded in place for fixed application.
Extra Long Jack Bar. The JB101XL Jack Bar is constructed of square Steel tubing and an Extral Long Rack. WILL NOT SHIP VIA UPS, WE HAVE TO QUOTE SHIPPING COST br>
Standard Jack Bar. The JB109 One-Piece Jack Bars are constructed of square Galvanized Steel tubing and feature a Standard Rack. WILL NOT SHIP VIA UPS, WE HAVE TO QUOTE SHIPPING COST br>
Standard Square Jack Bar, The JB101 Jack Bars are constructed of square Steel tubing and a Standard Rack. WILL NOT SHIP VIA UPS, WE HAVE TO QUOTE SHIPPING COST br>
All C and J hooks are flame cut from 5/8" steel. They are designed to fit flat on truck trailer side frames for easy welding and will accept D-rings, web loops, cable or rope.
Working Load Limit: 6,670 lbs./3032 kgs.
Note: Strength is dependent upon the and integrity of the weld. Minimum welding requirements are 1/4" fillet weld around entire contact surface, and 1/8" penetration.
This Garment Beam is specially designed for carrying garments on hangers suspended from rope loops in closed trailers. BECAUSE OF THE LENGTH, THESE ARE COSTLY TO SHIP SMALL QUANTITIES br>
This Garment Beam is specially designed for carrying garments on hangers suspended from rope loops in closed trailers. BECAUSE OF THE LENGTH, THESE ARE COSTLY TO SHIP SMALL QUANTITIES br>
The Garment Beam is specially designed for carrying garments on hangers suspended from rope loops in closed trailers. BECAUSE OF THE LENGTH, THESE ARE COSTLY TO SHIP SMALL QUANTITIES br>
Kinedyne's floor chain tie-down is for use on steel frame flatbed trailers with standard hardwood decks. It is a self-storing, convenient anchor point for securing loads. Welds to trailer cross member. It mounts flush with the standard hard wood trailer deck to prevent interference during loading or unloading.
Working Load Limit: 5,000 lbs./2270 kgs.
Minimum weld requirements are 1/4" filet weld around entire contact surface and 1/8" penetration.
All C and J hooks are flame cut from 5/8" steel. They are designed to fit flat on truck trailer side frames for easy welding and will accept D-rings, web loops, cable or rope.
Working Load Limit: 6,670 lbs./3032 kgs.
Note: Strength is dependent upon the quality and integrity of the weld. Minimum welding requirements are 1/4" fillet weld around entire contact surface, and 1/8" penetration.
Sliding winches will move easily in both directions to position on the track and then lock into place when tension is applied to the webbing. Sliding winches must be used with Kinedyne winch track (part numbers 3606,3606-12 and 3607).Weight:
Sliding winches will move easily in both directions to position on the track and then lock into place when tension is applied to the webbing. Sliding winches must be used with Kinedyne winch track (Part Numbers 3606 and 3607). All sliding winches can also be welded in place for fixed application.
Strap winders are made of all steel construction with zinc plating. They easily clamp to trailer side rail, and can be wound in either direction. Winder will quickly wind 2" to 4" wide straps and conveniently disassemble for storage.