Stainless Steel Chain, Grade 50 Chain Made in America

• DO NOT load an assembly in excess of the rated working load limits in the chart below.
• DO NOT put an unequal load on one leg of a sling. Distribute the load evenly.
• DO NOT expose assembly to impact, rapid lifts or sudden stops.
• DO NOT tie knots or allow chains to become twisted.
• DO NOT use chain that appears to be defective, worn or damaged.
• DO NOT fasten chain over sharp corners or edges. Protect with padding.
• DO NOT tip load hooks. The latch must NEVER support the load.
• When using non-cradle or non-shortening grab hooks in a shortening or choker application, the Working Load Limit (WLL) of the sling must be reduced by 20%.

 *Scroll down to choose your referenced size.